Connecting wires to terminals, English i 19 – Kenwood KDC-MP408U User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Wires to Terminals
REMO.CONT
Steering remote control (Light Blue/Yellow)
(KDC-X492/MP438U/MP408U only)
To use the steering wheel remote control feature, you need to an exclusive
remote adapter (not supplied) matches your car is required.
When this terminal is not in use, leave its cap on.
Front preout
(KDC-MP338 only)
FM/AM antenna input
(KDC-X492/MP438U/MP408U)
FM/AM antenna input
(KDC-MP338)
To Kenwood disc changer/
External optional accessory
KDC-X492/MP438U
) Qj Rear preout
Front preout
[Qi SubWoofer preout
KDC-MP408U
R
^
O
Rear preout/SubWoofer preout
KDC-MP338
O.
Rear preout/SubWoofer preout
Wiring harness
(Accessory©)
If no connections are made, do not let the wire come out from the tab.
Power control/Motor antenna control wire
TEL mute wire (Brown)
P.CONT
Motor antenna control wire (Blue)
MUTE
ANT.
CONT
Dimmer control wire (Orange / White)
(KDC-X492/MP438U/MP408U only)____
ILLUMI
Connect either to the power control terminal when using the
optional power amplifier, or to the antenna control terminal
in the vehicle.
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
To connect the Kenwood navigation system, consult
your navigation manual.
Depending on what antenna you are using, connect either to
the control terminal of the motor antenna, or to the power
terminal for the booster amplifier of the film-type antenna.
^.iTo car light control switch
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
■©
■©
■©
■ ®
-©
-®
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key switch
Car fuse box
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) Q (To car chassis)
Car fuse box
(Main fuse)
7777777777
Battery
English I 19