RCA RCR4383 - Manual

RCR4283 / RCR4383
Universal Remote Control
Owner's Manual
Manual del Propietario (parte posterior)
INFO key
displays
information
for the
component
you’re
controlling
Transport
keys,
including
SKIP and
SLOW, give
you better
DVD/DVR
control
Component
keys (TV.
SAT*CBL,
DVD-VCR.
DVR-AUX)
Dedicated -
MENU and
GUIDE
keys let
you access
advanced
component
functicKis
0 0
®
Actual
mode/ may
vary from
picture
shown
The INPUT and — (dash) key has three
funaions: (1) it toggles through all the video
sources connected to your TV; (2) when the
remote is in VCR mode, this button toggles
between VCR and the TV Input; (3) when
you're entering digital channel numbers
directly, this button lets you separate the main
channel number from the subchannel number
Care and Maintenance
• Keep the remote dry. if it gets wet. wipe it dry Immediately.
• Use and store the remote only in normal tenrtperature
environments.
• Handle the remote gently arwl carefully. Don't drop it
• Keep the rentóte away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it
locking new.
• Modifying or tampering with the remote's irrternal components
can cause malfunction and invalidate its warranty.
Four-Component
Universal Remote
Cbngraiuüúons on youx purchase of this four-component
universal remote. This tmiscnal remote controls up to lour
electronic compfmmts and makes fugglmg, remote controls
a chmg of the past. Your remote ts guaranteed to work with
all brands of components. This remote is unusoaOy versatile
because ir has
a DVR«AUX key that you can piognm to conooi
any \*idco component. The four-compODent onivenal temóte is
easy
TO use, easy to program and gives you control at the touch
of your fingertips,
SAVE THIS MANUAL AND THECODE LISTS!
Rfmair comtroh can umeitMUS lou tbeir proffommin^ wbotyou
dbaitff dk kattents, <VLiLr suxtycu ¡utf the manual and code lists in
a ud'e place so that you can reprogram the remote ^'ytm need to.
Tip: The four-component universal remote is alrea^ programnud
to operate most RCA, GE tvtd PROSCAN branded T\>% VCRs,
DVD players and satellite receivers, just press the corresponding
kjy-DVD*VCRjor a DVD player, TV jin a television, SAT*CBL
for a satellite receiver. DVR»AUXfor a DVft
Battery Installation and Information
Your universal remote requires two A\A alkaline batteries
(batteries may or may not be included, depending on model).
1b install the batteries:
1. Press and push the battery
oHnpaitment cover to remove it.
2. Insert the batteries matching die
batteries to the (4-) and (-) marks
inside the battery compartment
3. I\ish the battery cover back into place.
Note: Ij'you are replacing batteries, tjy not to press any buttons efier
you’ve taken the old halteries out. Pressing buttons while replacing
batteries causes the remote to lose the devices you Vv programmed. You
will need to program the remote again.
Battery Prccautíons:
• Do not mix .aid and new oaUerm,
• Do not mix alkaline, standard(carhon-r.hic) orreSargahk (niekel-
cadmium) batteries.
• Always remente old, weak or worn-out batteries prompt^ and ruyde or
dispose of them in accordance with Local and National Regulations.
Battery Saver
Your universal remote control saves battery power by
aulomaiically turning off if any key is pressed for more than
60 seconds. This saves your battery lire should your remote
gel stuck in a place where the keys remain depressed, such as
between sofa cushions.
Programming Your Remote
Your universal remote can operate a vaneiy oi brands ot
components. In order for your universal remote to control your
components, you need to program the remote with the codes
that match the components (See Code Lists enclosed or go to
rca.com/codcfinder). These code^s enable the remote to
communicate with your components. Each brand and each
component has its own “language,” and, by programming the
correct codes into your remote, you ttU the remote to “speak the
same language' as your components.