JVC LVT1089-001B User Manual
Td-w271, Instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Cassette tape
- Fig. 2
- Auto tape select mechanism (decks A and B)
- Operations
- SELECTING THE AC SUPPLY VOLTAGE
- NAMES OF PARTS AND THEIR FUNCTIONS
- AUTO REVERSE OPERATION
- PLAYBACK
- Playback of deck A
- Playback of deck B
- Continuous play
- Note:
- Notes:
- Deck B only
- DDRP (Dynamics Detection Recording Processor) recording
- RECORDING LEVEL ADJUSTMENT
- AUTOMATIC RECORD MUTING (DECK B)
- A. To leave non-recorded sections of about 4-5 seconds automatically
- B. To leave non-recorded sections of more than 4-5 seconds
- C. To leave non-recorded section of less than 4-seconds
- ERASING
- DOLBY NR and DOLBY HX PRO
- Dolby NR System
- Note:
- Dolby HX PRO headroom extension
- COMPU LINK CONTROL SYSTEM
- Automatic Power On/STANBY Function (COMPU LINK-3)
- Automatic Source Selection (COMPU LINK-1, 3)
- Synchronized Recording (COMPU LINK-1, 3)
- DDRP (Dynamics Detection Recording Processor) recording
- Notes:
- * Synchro dubbing
- Tape editing
- Notes at dubbing
- The importance of cleaning
- Cleaning the heads, pinch roller and capstan
- Demagnetizing the heads
- What appears to be trouble is not always real trouble. Make sure first....
- 1. Cassette cannot be loaded.
- 2. When PLAY button is pressed, tape does not move.
- 3. Tape runs, but no sound is heard.
- 4. Sound quality is poor.
- 5. Recording cannot be performed.
- 6. Previous recording is not completely erased.
- 7. Since tape speed is irregular, wow and flutter occur.