9 setting up centralized management, Setting up centralized management, Setting up centralized – Cisco 4400G User Manual

Page 22

Advertising
background image

22

Step 5

To confirm your selections and to implement them until
you change them or until you restart your DMP,
click Apply.

Step 6

To test if your selections are suitable ones for your
DMP display, click Show IP in the DMP Mode area.

Your DMP display should show a Cisco logo and
should show the IP address for your DMP.

Step 7

To make your configuration changes permanent, even
after you restart your DMP, do the following:

a.

Select Administration > Save Configuration.

b.

On the Save Configuration page, click Save.

9

Setting Up Centralized Management

If your DMP will be managed centrally as part of a digital
signage network, you must configure DMPDM and DMM-DSM
to work together.

Advertising