Comfort Company Swing-Away Lateral Pads Cane Mount - Manual

Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
IS-SWINGAWAYLATERALPADSCANEMOUNT
REV0413
SWING AWAY LATERAL PADS WITH CANE MOUNT
Loosen bolts (A) using the provided
5mm Allen wrench.
Position the wheelchair rail (D) inside the cane
assembly (C-D-L-B-A) as shown in the figure.
To adjust the orientation of the mounting
brackets (E and I), loosen but do not remove
bolts (J) using the 5mm Allen Wrench. Securely
tighten once mounting brackets are in position.
1
2
Loosen bolts (F or K) from cane and lateral mount
brackets (E or I) to properly position the lateral
pad (H).
3
4
To swing away the lateral pad, press swing away
lever (M). Assembly will snap back into place
when returned to its original position.
5
PARTS INCLUDED:
1 - Swing Away Lateral Hardware Assembly with Cane Mount (LT_-SC)
1 - 5mm Allen Wrench
1 - 5/32” Allen Wrench
E
K
I
H
J
A
B
L
F
G
C
D
M