COMP Cams 5492 Camshaft Phaser Locking Plates For 2011 Ford 5.0L Modular V8 - Manual

COMP Cams®
3406 Democrat Rd.
Memphis, TN 38118
Phone: (901) 795-2400 Fax: (901) 366-1807
www.compcams.com
Part #COMP4-136
Revised 4/25/13
#5492 Parts List:
(4) Adjustable Phaser Locking Plates
(24) M6 Flat Washer
(4) Camshaft Oil Plugs
Tools Required for Installation:
Metric Socket Set
Ratchet
Torx T-30 Socket
10mm Socket (12 point)
4mm Allen Socket
Snap Ring Pliers
1½" Open Ended Wrench
Camshaft Degree Kit
Part #5492 Camshaft Phaser Locking Plates For 2011 Ford 5.0L Modular V8
Thank you for choosing COMP Cams
®
products; we are proud to be your manufacturer of choice.
Please read this instruction sheet carefully before beginning installation, and also take a moment to
review the included limited warranty information.
Instructions
1. Disconnect the negative post of your battery.
2. Remove any beauty/coil covers from the
engine.
3. Remove the coil and phaser actuator electrical
connectors, from both banks of the engine.
4. Remove the coils and valve covers from both
sides of the engine.
5. Remove spark plugs, this will ease rotation of
the engine later on.
6. Remove camshaft actuators. These are the tall pieces that stick up through the valve covers and
sit just in front of the cam phaser. They are mounted to the front cover with two 8mm bolts
each.
INSTRUCTIONS