Compex Technologies NP25G 6C User Manual
Compex Technologies Hardware
Advertising
Table of contents
Document Outline
- © Copyright 2007 Compex Systems Pte Ltd
- Trademark Information
- Disclaimer
- FCC NOTICE
- Declaration of Conformity
- Firmware
- This manual is written based on Firmware version 2
- Table of Contents
- Overview the Product
- Install the Hardware
- Overview the LEDs
- Setup the Software
- Setup Secured Wireless Connection
- Perform Configuration
- Passphrase (Alphanumeric characters)
- Hexadecimal
- Follow these steps to change the radio settings of the router.
- WDS2 (Wireless Distributed System 2) links up access points to create a wider network in which mobile users can roam while still staying connected to available network resources. The wireless client and root access point has to be set up with the same channel frequency. This allows them to connect even when the link is lost, as the channel frequency setting is preserved.
- Configure Security
- 2. First, enable the firewall. You can choose among the Default Low, Default Medium or Default High security options for convenient setup.
- 3. Then you may choose the type of network activity information you wish to log for reference. Data activity arising from different types of protocol can be recorded.
- View Firewall Logs
- Administer the System
- Appendix: Learn About Commonly Used Terms
- Appendix: View the Technical Specifications
- Technical Support Information