Crown Audio XLS 5000 User Manual

Page 7

Advertising
background image

XLS Series Power Amplifiers

Operation Manual

Mode d'emploi

page 7

Amplificateurs de puissance

Bedienungsanleitung

Leistungsendstufen

Manual de Operación

Amplificadores de potencia

2 Setup

2 Installation

2 Installation

2 Instalación

2.1 Unpack Your Amplifier

Please unpack and inspect your amplifier for
any damage that may have occurred during
transit. If damage is found, notify the transpor-
tation company immediately. Only you can ini-
tiate a claim for shipping damage. Crown will
be happy to help as needed. Save the shipping
carton as evidence of damage for the shipper’s
inspection.

We also recommend that you save all packing
materials so you will have them if you ever
need to transport the unit. Never ship the
unit without the factory pack.

YOU WILL NEED (not supplied):

Input wiring cables

Output wiring cables

• Rack for mounting amplifier (or a stable
surface for stacking)

WARNING: Before you start to set up
your amplifier, make sure you read and
observe the Important Safety Instruc-
tions found at the beginning of this
manual.

2.1 Auspacken der Endstufe

Bitte untersuchen Sie Ihre Endstufe nach dem Aus-
packen auf mögliche Transportschäden. Benachrich-
tigen Sie den Transporteur im Falle eines Schadens
umgehend, denn nur Sie können den Schaden gel-
tend machen. Falls nötig wird Crown Sie dabei unter-
stützen. Bewahren Sie den Versandkarton zum
Schadensbeweis auf.

Wir empfehlen auch, das Verpackungsmaterial zum
eventuellen Transport des Geräts aufzube-
wahren. Bitte verschicken Sie das Gerät
immer in der Originalverpackung.

SIE BENÖTIGEN (im Lieferumfang nicht enthalten):

• Lautsprecherkabel

• ein Rack zum Einbau der Endstufe (oder eine sta-
bile Oberfläche zum Stapeln)

WARNUNG: Befolgen Sie in jedem Fall die
wichtigen Sicherheitshinweise am Anfang
dieser Bedienungsanleitung, bevor Sie mit
der Installation Ihrer Endstufe beginnen!

2.1 Desempaque Su Amplificador

Por favor desempaque e inspeccione su amplificador
por cualquier daño que pueda haber ocurrido durante
el transporte. Si encuentra algún daño, notifique
inmediatamente a la compañía transportista. Sola-
mente usted podrá iniciar una reclamación por daños
durante el envío. Crown se complacerá en brindar la
ayuda necesaria. Conserve el empaque de envío
como prueba del daño para la inspección del
remitente.

También le recomendamos conservar todos los mate-
riales de empaque para que cuente con ellos en caso
de necesitar transportar la unidad. Nunca envíe la
unidad sin el empaque de fábrica.

USTED NECESITARA (No provisto):

• Cables para la conexión de entrada

• Cables para la conexión de salida

• Gabinete para montar el amplificador (o una
superficie estable para ponerlo encima)

ADVERTENCIA: Antes de empezar a config-
urar el amplificador, asegúrese de leer y
observar las Instrucciones de Seguridad
Importantes que se encuentran al principio
de este manual.

2.1 Déballez votre amplificateur

Veuillez déballer et inspecter votre amplificateur à
la recherche de tout dommage pouvant s'être produit
durant le transport. Si vous constatez un dommage,
prévenez immédiatement la société de transport.
Vous êtes le seul à pouvoir déposer une réclamation
pour un dommage de transport. Crown sera ravi de
vous aider en cas de besoin. Conservez le carton
d'emballage comme preuve du dommage pour
l'inspection par le transporteur.

Nous vous recommandons aussi de conserver tous
les éléments d'emballage à disposition au cas où
vous devriez transporter l'unité. N'expédiez
jamais l'unité sans son emballage d'usine.

IL VOUS FAUDRA (non fournis):

• Des câbles pour l'entrée,

• Des câbles pour la sortie.

• Un rack pour monter l'amplificateur (ou une sur-
face stable pour le poser)

AVERTISSEMENT: Avant de commencer à
installer votre amplificateur, veillez à
lire et suivre les instructions de sécurité
importantes se trouvant au début de ce
manuel.

Advertising
This manual is related to the following products: