Choose, Press the shutter button all the way down, Face the camera and wink – Canon D20 User Manual

Page 92: Using the wink self-timer

Advertising
background image

Special Modes for Other Purposes

92

Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.

Choose .

Follow step 1 on p. 78 and choose

, and

then press the

p button.

Press the

qr buttons to choose

, and

then press the

m button.

Compose the shot and press the
shutter button halfway.

Make sure a green frame is displayed around
the face of the person who will wink.

Press the shutter button all the way
down.

X

The camera now enters shooting standby
mode, and [Wink to take picture] is displayed.

X

The lamp blinks and the self-timer sound is
played.

Face the camera and wink.

X

The camera will shoot about two seconds
after detecting a wink by the person whose
face is inside the frame.
To cancel shooting after you have triggered
the self-timer, press the

n button.

Using the Wink Self-Timer

If the wink is not detected, wink again slowly and deliberately.

Winking may not be detected if eyes are obscured by hair, a hat, or glasses.

Closing and opening both eyes at once will also be detected as a wink.

If winking is not detected, the camera will shoot about 15 seconds later.

To change the number of shots, press the

op buttons after choosing

in

step 1. [Blink Detection] (p. 74) is only available for the final shot.

If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.

Advertising