HP LaserJet 4610n - Manual (Page 46)

Paper handling menu
The paper handling menu allows you to configure input trays by size and type. It is important
to correctly configure the trays with this menu before you print for the first time.
NOTE If you have used other HP LaserJet printer models, you might be accustomed to configuring
Tray 1 to first mode or cassette mode. On theHP Color LaserJet 4610n printer, setting Tray
1 size and type to ANY SIZE is equivalent to first mode. Setting size or type for Tray 1 to a
setting other than ANY SIZE is equivalent to cassette mode.
Menu item Value Description
TRAY 1 SIZE A list of available sizes appears. Allows you to configure the
media size for Tray 1. The
default is ANY SIZE. See
Supported media weights and
sizes
for a complete list of
available sizes.
TRAY 1 TYPE A list of available types appears. Allows you to configure the
media type for Tray 1. The
default is ANY TYPE. See
Supported media weights and
sizes
for a complete list of
available types.
Tray <N> Size
N = 2
A list of available sizes appears. Allows you to configure the
media size for Tray 2. The
default setting is the size
detected by the guides in the
tray. To use a custom size,
move the switch in the tray to
custom. See
Supported media
weights and sizes for a
complete list of available sizes.
Tray <N> Type
N = 2
A list of available types appears. Allows you to configure the
media type for Tray 2. The
default is PLAIN. See
Supported media weights and
sizes
for a complete list of
available types.
34 Chapter 2 Control panel ENWW