HP LaserJet 4610n - Manual (Page 47)

Configure device menu
The configure device menu allows you to change the printer’s default printing settings, adjust
the print quality, change the system’s configuration and I/O options, and reset the printer’s
default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the
properties and override the values set from this menu. This menu can also be used to set
default media size and type.
Menu item Values Description
COPIES 1-32000 Allows you to set the default
number of copies. The default
number is 1.
DEFAULT PAPER SIZE A list of available sizes
appears. Allows you to set the default
media size. This setting applies
only to print jobs that do not
have a paper size specified in
the program or printer driver.
DEFAULT CUSTOM PAPER SIZE UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Allows you to set the default
size for any job without
dimensions. This menu item
appears only if the CUSTOM/
STANDARD switch on the
selected tray is set to CUSTOM.
OVERRIDE A4/LETTER NO
YES
Allows you to set the printer to
print an A4 job on letter-size
paper when no A4 paper is
loaded. The default is NO.
MANUAL FEED OFF
ON
Feeds the paper manually from
Tray 1 rather than
automatically from a tray. If
MANUAL FEED is set to ON
and Tray 1 is empty, the printer
goes offline when it receives a
print job. MANUALLY FEED
[PAPER SIZE] appears on the
printer control panel display.
The default is OFF.
ENWW Configure device menu 35