Setting up the wireless-g ip phone – Cisco WIP300 User Manual
Page 20
Wireless-G IP Phone
11
Chapter 3: Installing and Using the Wireless-G IP Phone
Setting up the Wireless-G IP Phone
Setting up the Wireless-G IP Phone
Before you begin, make sure you have an active Internet connection and the account information provided by your Internet phone service provider.
1. Press the Power button to turn on the Phone.
2. Press the Menu Soft Key.
3. Scroll to Profile, then press the Navigation button to enter the Profile menu.
4. You see a message asking you to create a password. Press the Navigation button, then use the numeric keypad to enter a password.
Note: The Phone automatically dims and turns off the LCD display when the Phone is not in use. If this happens while you are
configuring the Phone, press any key to turn the display back on and continue configuring the Phone.