Cisco WIP300 - Manual (Page 44)

Wireless-G IP Phone
35 Chapter 4: Configuring the Wireless-G IP Phone
Call Settings
Call Settings
The Call Settings menu allows you to change all call related settings on the IP Phone. Refer to the table below for a list of options availabe in the Call
Settings menu.
c
Speed Dial
The Speed Dial menu allows you to change the way the phone’s speed dial function works. You can select Disable to disable speed dial, Ask to see a
confirmation screen before the phone dials a contact, or Dial to immediately dial a contact.
Option Description
Call Waiting Enable or disable call waiting.
Call Forward Make changes to call forwarding settings. Press the Select Soft Key to select from the following call
forwarding options:
• Forward Number: Allows you to enter a number to forward calls to.
• Forward All: Allows you to forward all calls.
• No Answer: Allows you to forward missed calls.
• Busy: Allows you to forward calls when your phone is busy.
• Cancel All: Allows you to cancel all call forwarding options.
Block Caller ID Enable or disable caller id blocking.
Refuse Private Block incoming calls from callers with a private caller id.
Beep
Notification Enable or disable the Beep Notification feature. When this feature is enabled, the phone will beep
every 50 seconds so that you can keep track of how long you’ve been on a call.
Hold Transfer Select SIP or DTMF Flash as the method used for transferring calls.
Regional Tone Set the Regional tone setting to North America or Japan.