Crestron electronic CNRFGWA-418 - Manual (Page 16)

ISYS I/O WIFI & HANDHELD REMOTES
WiFi Touchpanel & Handheld Remote Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
wifi & handheld remotes
DOCKING STATIONS & BATTERY PACKS
142
TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X
The TPMC-8X-DSW Wall Mount Docking Station
facilitates charging of the TPMC-8X WiFi Touchpanel
while simultaneously enabling fully wired touchpanel
operation.
Secure Wall Mount Dock—While docked, the
touchpanel is secured in place by an electronic latch.
The touch-panel lays flush within the docking station
providing a refined appearance while prohibiting prying
fingers or an accidental bump from dislodging it. When
released, the mechanism gently extends the touchpanel
outward, ready to be disengaged for wireless use.
For secure applications, a choice of fingerprint recognition
or pass code entry on the touchpanel can be used to
prevent unauthorized removal. All functions of the
docking station can also be controlled programmatically
from the control system via Ethernet, and through
Crestron’s RoomView ® Remote Management Software.
A hardware key is provided to release the touchpanel
from the docking station in the case of a power failure.
High-Speed Connectivity—On the rear of the
TPMC-8X-DSW, a 10/100 Ethernet port provides for
direct connection to a wired LAN, allowing fully wired
operation of the touchpanel while docked. Two (2)
USB ports are included to support a wired mouse
and keyboard (not included). A professional balanced
stereo audio output provides a means of amplifying or
redistributing streaming audio from the touchpanel’s
embedded media player applications.
Multi-Battery Charger—The TPMC-8X-DSW not only
charges the touchpanel’s internal battery, it can charge
an optional external battery pack as well. In fact, it
can charge one external battery pack attached to the
touchpanel while simultaneously charging a second
spare external battery pack placed in its own charging
slot within the docking bay. The spare battery pack can
even be left in place to charge while the touchpanel is
removed, keeping one battery pack charging at all times.
Note: TPMC-8X WiFi Touchpanel and all battery packs
sold separately. USB mouse/keyboard not included.
SPECIFICATIONS
Ethernet
10/100BaseT, auto-negotiating, full/half duplex, static IP or
DHCP/DNS
Connectors
24VDC: (1) 2-pin 7.62mm detachable terminal block
24 Volt DC power input
Wire Size: 12 AWG maximum
LAN: (1) 8-wire RJ45 with 2 LED indicators
10BaseT/100BaseTX Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet activity
USB: (2) USB Type A female
USB 2.0 ports for keyboard/mouse
AUDIO OUT: (1) 5-pin 3.5mm detachable terminal block
Balanced/unbalanced stereo line-level audio output
Buttons
POWER/SUSPEND: (1) Pushbutton, activates the
POWER/SUSPEND function on the TPMC-8X touchpanel.
Power Requirements
50 Watts (2 Amps) @ 24 Volts DC
May be powered by Cresnet or dedicated power supply
PW-2420RU or larger power supply sold separately
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Chassis: Metal, flush-mountable
Faceplate: Injection-molded plastic, color-matched to
touchpanel
Back Box (sold separately): Steel electrical box with
conduit knockouts, for pre-construction drywall installation
(touchpanel not included)