Canon Projector LV-8235 UST - Manual (Page 35)

5
ENGLISH
System
This function is to select the system of signal
input to the projector. The available system
mode are listed on the pull-down menu but-
ton according to the input signal. Select a
system and then click Set button.
Control
✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adj." (+ p.38) is available, they are
also listed together with the above mode.
Available system at the ANALOG PC input
Item Description
XGA1 ........................ It automatically switches to the proper computer system of the input signal.
* The computer system modes (VGA, SVGA, XGA, SXGA, UXGA, WXGA...) which meet
the input signal are listed.
Available system at the HDMI input
Item Description
D-XGA ...................... It automatically switches to the proper computer system of the input signal.
* The computer system modes (D-VGA, D-SVGA, D-XGA, D-SXGA1...) which meet the
input signal are listed.
D-480p .................... It automatically switches to the proper scanning system of the input signal.
* The scanning systems are D-480p, D-575p, D-720p, D-1080i and D-1080p.
Available system at the VIDEO/S-VIDEO/SCART input
Item Description
AUTO ........................ It automatically switches to the proper color system of the input signal.
* The color systems are PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N.
* AUTO is fixed at the Scart input.
Available system at the COMPONENT input
Item Description
AUTO ........................ It automatically switches to the proper scanning system of the input signal.
* The scanning systems are 480i, 575i, 480p, 575p, 720p and 1080i.
* When the input signal is any of Video, S-video, Scart, Component or HDMI, it only displays the cur-
rent system of signal input but no suggested system.