Canon Projector LV-8235 UST - Manual (Page 41)

1
ENGLISH
Setting up the projector
Item Description
Filter counter(h)
...................................... Displays the filter counter. Reset the time
after filter replacement. Click "Reset", a
confirmation display appears, and then
click "OK", the time will be reset.
Filter warning..... Sets the time to indicate the filter warn-
ing message on the screen. (OFF, 2000H,
3000H, 4000H)
Factory default ... Sets all of the projector control items to
the factory default setting except the fol-
lowing items.
User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
time
* This function is effective for all the Network settings.
Blank ........................ Sets the black out image temporarily. (ON, OFF)
Freeze ...................... Sets the image to freeze mode. (ON, OFF)
Closed caption .. Sets the closed caption function.
Closed caption ... Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)
Color ..................... Sets the color of the contents. (Color, White)
Setting 3
Item Description
Terminal ................. Sets the COMPUTER IN 2/MONITOR
OUT terminal. (COMPUTER2, Monitor
out)
Power management mode
...................................... Sets into the selected power man-
agement mode (Standby, Exit, OFF)
if the input signal is interrupted and
no control key is pressed for the
specified period of time.
* The specified time can be set 1 to 30 min.
Direct power on
......................................Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF)
Lamp mode ......... Selects lamp control mode. (Normal, Eco)
Key lock .................. Sets the prohibition of controls either Projector or Remote control. (OFF, Projector,
Remote control)
Fan control ............. Sets the fan control speed.
OFF Normal mode
ON1 Highland mode 1
ON2 Highland mode 2
Lamp Corres.
Value(h) .................. Displays the lamp use time (Corresponding value) . Reset the time after lamp
replacement. Click "Reset", a confirmation display appears, and then click "OK", the
time will be reset.
Setting 2