CH Tech PX412S - Manual

C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com
AC Characteristics:
Bandwidth (-3dB) : >10 MHz (typ)
Crosstalk (typical)
<100 KHz: <-64 dB
<1 MHz <-44 dB
<10 MHz <-24 dB
Closed channel capacitance:
Hi-Lo: <40 pF (typical)
Hi-Chassis: <60 pF (typical)
Lo-Chassis: <60 pF (typical)
Typical Relay Life at Rated Load:
10E5 operations
Time to close or open: 8 ms
Connectors: 44 pin DSUB
(female)
Temperature:
Operating: 0°C to 55°C
Storage: -40°C to 75°C
Power: +5V @ 0.6 A
CPCI/PXI Compliance
Complies with PCI spec. 2.0 R3.0
and PCI spec 2.2
5V and 3.3V signaling voltage (VIO)
supported
5V only power supply
33MHz PCI data bus
Five trigger lines compliant with PXI
Specification 2.1
Form Factor: 3U
Applications
• LF Signal Switching
• Instrument Matrix with Kelvin
switching
Ordering Information
Part Number 11030190-0001
Additional Information
User Manuals for C&H carriers and
this module can be found on our
website at www.chtech.com.
Specifications:
Inputs:
Maximum Voltage (terminal to
terminal or chassis) **
DC: 60V / 200V
AC rms: 48V / 125V
AC peak: 68V / 175V
Maximum Current (non-inductive)
Per Switch/Per Module:
DC: 2A / 8A
AC peak: 2A / 8A
Maximum Power Per Switch/Per
Module:
DC:
50W / 200W
AC: 50VA / 200VA
DC Characteristics**:
Thermal Offset: <3_V (typical)
Contact Resistance: <0.3_
Insulation Resistance: 10E8_
** See manual for conditions
PX412S
4 x 4 Matrix
Switch Module
T h e P X 4 1 2 S p r o v i d e s 1 6
i n d e p e n d e n t l a t c h i n g D P S T
switches configured as a 4 x 4
matrix. These two wire switches
have maskable interrupts that occur
w h e n
t h e r e q u e s t e d r e l a y
movements have been made. The
module also has a FIFO for storing
up to eight relay operations. This
module is useful when instrument
matrix switching is needed in your
system.
This unit also features a position for
adding one single-wide M-Module.