Haltech E6K - Manual

i
E6K Manual
Warning
This system is capable of controlling either “intelligent “ igniters such
as the Haltech EB023 igniter, which has in-built dwell control or
“dumb” igniters which contain no such control. This allows standard
igniters to be used in many cases. Most standard igniters are dumb
igniters.
However, it is very important to set the system up to match the type of
igniter used. In the ignition set-up page the set-up should be:
To control intelligent igniters set up as “Constant Duty”
To control dumb igniters set up as “Constant Charge”
If the wrong set-up is used the system will not function correctly, also
it is possible to burn out the igniters as a result. Burning out igniters
due to wrong set-up will not be regarded as warranty