Heli-Max HMXE0809 - Manual (Page 5)

5
®
INTRODUCTION INTRODUCTION
Thank you for purchasing the Heli-Max Novus 200 FP Helicopter. We are
certain you will get many hours of enjoyment out of this model. If you should
have any questions or concerns please feel free to contact us at
helihotline@
hobbico.com . For the latest technical updates or manual corrections to the
Novus Helicopter visit the Heli-Max web site at:
www.helimax-rc.com
Open the “Helicopters” link, and then select the Novus 200 FP. If there is new
technical information or changes to this model a “tech notice” box will appear in
the upper left corner of the page.
®
SAFETY PRECAUTIONS SAFETY PRECAUTIONS
Failure to follow these safety precautions may result in severe injury to
yourself and others.
Keep your face and body as well as all spectators away from the plane of
rotation of the rotors whenever the battery is connected.
Keep these items away from the rotors: loose clothing, shirt sleeves, ties, scarfs,
long hair or loose objects such as pencils or screwdrivers that may fall out of
shirt or jacket pockets into the rotors.
The spinning blades of a model helicopter can cause serious injury. When
choosing a fl ying site for your Novus 200 FP, stay clear of buildings, trees and
power lines. AVOID fl ying in or near crowded areas. DO NOT fl y close to people,
children or pets. Maintain a safe pilot-to-helicopter distance while fl ying.
Your Novus 200 FP should not be considered a toy, but rather a sophisticated,
working model that functions very much like a full-size helicopter. Because of
its performance capabilities, the Novus 200 FP, if not operated correctly, could
possibly cause injury to yourself or spectators and damage to property.
Do not alter or modify the model, as doing so may result in an unsafe or unfl yable
model. In a few cases the instructions may differ slightly from the photos. In
those instances the written instructions should be considered as correct.
You must check the operation of the model before every fl ight to insure that all
equipment is operating and that the model has remained structurally sound. Be
sure to check linkages or other connectors often and replace them if they show
any signs of wear or fatigue.