Cardinal Gates EX-5 User Manual

Mount ss-30, Assembly instructions, Model ex-5

Advertising
background image

K

L

N

O

Q

S

1

6 ”

A

(SS-30)

C

(SS-30)

C

(SS-30)

2

2X

N

3

5

ASSEMBLY INSTRUCTIONS

1. USING HARDWARE FROM THE SS-30 GATE,

install hinge bracket (A) to wall using Phillips

screw (C) beginning 6 ” above floor surface.

Install second screw (C) in top of hinge bracket

securing it to the wall.

(Use ruler on left edge of this sheet to measure

from floor)

2. Insert eye bolts with standard nut and washer

(N) into top and bottom of the first 21 ” BX2

extension.

3. Hang first BX2 extension by inserting hinge rod

(L), through top of mounted hinge bracket (A),

through upper plastic shoulder washer (O),

through both eye bolts, through lower plastic

shoulder washer (O), and finally through bottom

of hinge bracket. To secure hinge, insert key

ring (S) through hole in end of hinge rod.

4. Connect BX2 extensions together by using three

(3) 1 ” hex head bolts and washer using

hardware from BX2 (M) to join.

5. Mount hinge bracket (K) to end of final BX2

extension using 1 ” hex head bolts, washer and

lock nuts (P). Attach the T-Bar (T) support to

the bottom of the BX2 extension when inserting

lower hex bolt.

GATE IS RECOMMENDED FOR CHILDREN BETWEEEN 6 AND 24 MONTHS.

MODEL EX-5

T-BAR FLOOR MOUNT:

To give added stability,

secure gate to floor with

either 2” screws (Q) through

holes in bottom of T-Bar or

attach enclosed Velcro strips

(R).

OPTION

EXTENSION KIT TO ACCOMPANY MODEL SS-30

ALL PARTS IN STEP ONE COME FROM MODEL SS-30 HARDWARE

M

P

L

O

S

4

3X

M

P

2X

K

IMPORTANT: CARDINAL GATES RECOMMENDS USING

ONE (1) T-BAR SUPPORT BRACKET FOR EVERY

(2) TWO BX2 EXTENSIONS.

R

OPTION

6

6. Now move to SS-30 instruction sheet and mount

the Stairway Special gate to hinge bracket (K)

that was mounted in STEP FIVE.

Mount SS-30

T

T

Advertising