I.C.E. HTDM Food Process Unit - Manual

Industrial 51 Aikins Street
Commercial Winnipeg, MB
Equipment Canada, R2W 4E3
Manufacturing LTD.
HTDM
INSTALLATION, OPERATION AND MAINTAINANCE MANUAL
ATTENTION: Read this manual, unit submittal sheets and all labels attached to
the unit carefully before attempting to install, operate or service these units!
Check unit data plates for type of gas, model number and serial numbers. Retain
this document for future reference.
FOR YOU SAFTEY IF YOU
SMELL GAS FOLLOW THESE
INSTRUCTIONS,
1) OPEN WINDOWS
2) DO NOT TOUCH
ELECTRICAL SWITCHES
3) EXTINGUISH ANY OPEN
FLAMES
4) CALL THE GAS
SUPPLIER IMMEDIATLY
FOR YOUR SAFETY THE USE
OF GASOLINE OR OTHER
FLAMMABLE VAPORS AND
LIQUIDS IN OPEN
CONTAINERS IN THE
VICINITY OF THIS
APPLIANCE IS HAZARDOUS
Model:______________________ Serial Number:___________________
Job:________________________ Date of Installation:____________
WARNING
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR
MAINTAINACE CAN CAUSE PROPERTY DAMAGE OR DEATH. PLEASE READ THIS
INSTALLATION, OPERATION AND MAINTAINANCE MANUAL THOUROUGHLY BEFORE
INSTALLING OR SERVICING THIS EQUIPMENT
INSTALLERS RESPONSIBILITY
Installer please note: This equipment has been test fired and inspected. It has
been shipped free from defects from our factory. However, during shipment and
installation, problems such as loose wires, leaks or loose fasteners may occur.
It is the installer’s responsibility to inspect and correct any problems that
may be found.
INSTALLER/SERVICE CONTRACTOR
NAME:____________________________
ADDRESS:_________________________
TELEPHONE:_______________________
CONTACT:_________________________