ILY DiscLock DVD/CD duplication User Manual

ILY Computer hardware

Advertising
background image

1. Power on the duplicator (if not already on).

2. Use the Scroll buttons to select “12. Enable DiscLock” from the Main Menu. Press the ENT button.

Note: If there is a HDD present in your duplicator, this feature will be #13 instead of #12.

3. This enables the DiscLock feature.

Press ENT to load disc

and enable DiscLock

Note:

When the DiscLock feature is enabled the menu options are the following:

Press ENT to load

disc and execute

copying

Analyzing

source disc

Start Copying

Finished and

eject discs

Press ENT & ,

Press ENT

Special Feature: DiscLock DVD/CD duplication

The “DiscLock” feature implements a simple encryption protocol on your copied discs so they cannot be

copied in another duplicator. Protect your copies and your investment from unauthorized duplication with the

“DiscLock” feature.

How to Enable the DiscLock Feature

The DiscLock feature will work for DVD-R only. DVD+R and CD formats are not supported at this

time but may be supported with a firmware revision in the future.

In order for the DiscLock Feature to be successfully implemented on your DVD-R discs, 40 MB of

free space must be allocated on the blank DVD-R discs.

The DiscLock feature is only used for DVD to DVD (disc-to-disc) copying. The HDD-to-disc copying

cannot support this feature as the HDD cannot be used in conjunction with the DiscLock feature.

This feature is only for the DVD-Video format only. DVD-Data and other formats are not supported at

this time but may be supported with a firmware revision in the future.

1.

DiscLock Copy: The DiscLock copy function is the copy function with added DiscLock protection

protocol that is implemented on the copied disc(s).

2.

Set Burn Speed – This feature allows you to set the burn speed for DVD’s with DiscLock feature

implemented (1, 2, 2.4, 4, 6, 8, 12, 16, 18, 20, MAX).

Advertising
Table of contents