Cisco ONS 15454 SDH - Manual (Page 42)

15-42
Cisco ONS 15454 SDH Reference Manual, R4.6
April 2008
Chapter 15 Performance Monitoring
15.6.5 TXP_MR_10G Card Performance Monitoring Parameters
Rx Optical Pwr (Max) Maximum receive optical power (dBm)
Tx Optical Pwr (Min) Minimum transmit optical power (dBm)
Tx Optical Pwr (Avg) Average transmit optical power (dBm)
Tx Optical Pwr (Max) Maximum transmit optical power (dBm)
Table 15-45 Near-End or Far-End Regenerator Section PM Parameters for TXP_MR_10G Cards
Parameter Definition
RS-ES Regenerator Section Errored Second (RS-ES) is a one-second period with
one or more errored blocks or at least one defect.
RS-ESR Regenerator Section Errored Second Ratio (RS-ESR) is the ratio of
errored seconds to total seconds in available time during a fixed
measurement interval.
RS-SES Regenerator Section Severely Errored Second (RS-SES) is a one-second
period which contains 30 percent or more errored blocks or at least one
defect. SES is a subset of ES.
RS-SESR Regenerator Section Severely Errored Second Ratio (RS-SES) is the ratio
of SES to total seconds in available time during a fixed measurement
interval.
RS-BBE Regenerator Section Background Block Error (RS-BBE) is an errored
block not occurring as part of an SES.
RS-BBER Regenerator Section Background Block Error Ratio (RS-BBE) is the ratio
of BBE to total blocks in available time during a fixed measurement
interval. The count of total blocks excludes all blocks during SESs.
RS-UAS Regenerator Section Unavailable Second (RS-UAS) is a count of the
seconds when the regenerator section was unavailable. A section becomes
unavailable when ten consecutive seconds occur that qualify as RS-UASs,
and it continues to be unavailable until ten consecutive seconds occur that
do not qualify as RS-UASs.
RS-EB Regenerator Section Errored Block (RS-EB) indicates that one or more
bits are in error within a block.
Table 15-46 Near-End or Far-End Multiplex Section PM Parameters for TXP_MR_10G Cards
Parameter Definition
MS-ES Multiplex Section Errored Second (MS-ES) is a one-second period with
one or more errored blocks or at least one defect.
MS-ESR Multiplex Section Errored Second Ratio (MS-ESR) is the ratio of errored
seconds to total seconds in available time during a fixed measurement
interval.
Table 15-44 Physical Optics PM Parameters for TXP_MR_10G Cards (continued)
Parameter Definition