Interlogix IS-ZW-RC-1 - Manual

GE
Security
IS-ZW-RC-1 Remote Control
Installation Sheet
Description
© 2009 GE Security, Inc.
1 of 8
P/N 1069507 • REV A • ISS 18NOV09
Z-Wave technology is designed to automate lighting/home control
and provides easy remote operation of all your Z-Wave enabled
devices. The GE Z-Wave family includes a variety of devices to
control lighting in your home.
The remote control (model IS-ZW-RC-1) allows you to control up to
18 individual Z-Wave devices with one easy-to-use, compact unit.
You can also set up and control up to 18 groups of lights as well as
18 scenes for task or mood lighting. Groups can include up to 232
Z-Wave devices and each scene can include up to 32 Z-Wave
devices. Lights can be included in multiple groups. Scenes can
include lights from different groups. Your Z-Wave home control
network can include up to 232 Z-Wave enabled devices.
Additional features include:
• An easy to use LCD menu system
• Event programming
• Control of a Z-Wave enabled thermostat for your HVAC
system
This remote is based on the Z-Wave Controller Library and the
Remote Controller Generic Device Class. It controls devices that
support the following Z-Wave Command Classes:
• Basic Command Class
• Binary Switch Command Class
• Configuration Command Class
• Controller Replication Command Class
• Manufacturer Specific Command Class
• Multilevel Switch Version 1 Command Class
• Thermostat Command Class
• Version Command Class
Note: When using the Basic Command Class to control devices,
the remote will either transmit a value of 0 or 255, depending on
the button pressed.
Node is the technical term used to describe a Z-Wave device in a
home control network. Please note that the terms “Node”,
“Device”, and “Light” all refer to an individual Z-wave enabled
device and are interchangeable within the context of these
instructions.
Figure 1: Remote control
OK
1 2 3
4 5 6
7 8 9
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
CANCEL SETUP
SHIFT
LIGHT GROUP SCENE
ALL
LCD screen
Mode buttons
Menu selection
buttons
Number buttons
The unit provides the following:
LCD screen. Easy to use menu structure.
Mode buttons:
LIGHT button. Use to program and/or control individual
lights.
GROUP button. Use to program and/or turn multiple lights on
or off with one button.
SCENE button. Use to program and/or control multiple lights
at preset brightness levels. The same light may be included in
multiple scenes.
Thermostat icon button. Use to check and adjust system
and temperature settings on a Z-Wave enabled thermostat.
Menu selection buttons. Use arrow buttons to scroll between
menu items. Press OK to select the displayed menu item.