Interlogix T-500 User Manual

Transition series, Description, Mounting the reader

Advertising
background image

U.S.
T 855 536 3573
F 561 998 6224

Asia
T 65 6424 7932
F 65 6424 7978

Australia
T 61 3 9239 1200
F 61 3 9239 1299

Canada
T 800 267 6317
F 613 737 5517

EMEA
T 48 58 326 22 40
F 48 58 326 22 41

Latin America
T 503 589 8614
F 561 994 6572

www.utcfireandsecurity.com

© 2012 UTC Fire & Security. All rights reserved.

UTC Fire & Security, 9 Farm Springs Road,

Farmington, CT 06034-4065, USA

Transition Series

Multi-Technology Access Readers

Description

Transition™ multi-technology card readers feature
simultaneous compatibility with multi-vendor 125 kHz
Proximity, Mifare (ISO 14443A), and Vicinity (ISO 15693)
credential technologies—all in one reader. With this
remarkable technology combination, security
administrators can now deploy the Transition readers into
new or existing facilities.

Figure 1. Multi-technology Readers

Mounting the Reader

All models of the multi-technology series readers can be
mounted using a U.S. single-gang electrical box or
directly to a wall.
1. Find a suitable mounting position on the door frame

or wall.

Note: For out of doors or wet locations, it is recom-
mended that the gasket provided be installed on the
base as shown in Figure 5.

2. If mounting directly to the wall, use one of the

following methods:
2a. Drill two vertical mounting holes from 3.25”

(83 cm) to 4.891” (125 cm) apart on the mounting
surface of the door frame or wall.

Figure 2. Direct wall mounting

2b. Models 520/525 can be mounted using a second

pair of vertical mounting holes, horizontally
spaced 2.75” (70 cm) from the first pair.

Figure 3. T520/525 Direct wall mounting alternative

3. Drill one 0.625” (15.87 mm) diameter hole in wall for

the pigtail wire connection.

4. Follow the Cable Connection Chart to connect the

reader to the field panel and external door
equipment.

5. Mount the base plate to the wall using the supplied

screws.

6. Install gasket if required, see Figure 5.
7. Install the top cover to the reader base. The base

plate and top cover guides should be aligned, so the
connectors seat correctly.

Advertising