Canon Digital Video Camcorder ZR900 - Manual (Page 22)

Preparations
20
Point the controller at the
camcorder’s remote sensor when
you press the buttons.
You can rotate the LCD panel 180
degrees to use the wireless controller
from the front of the camcorder.
NOTES
• The wireless controller may not work
properly when the remote sensor is
situated under strong light sources or
direct sunlight.
• If the wireless controller does not work,
check that [WL.REMOTE] is not set to
[OFF
] ( 60). Otherwise, replace
the battery.
Accessories
Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
finger, and the
button with
your thumb.
Do not leave the viewfinder
exposed to direct sunlight
as it may melt (due to
concentration of the light by
the lens). Do not use tripods
with fastening screws
longer than 5.5 mm (0.2 in.).
Doing so may damage the camcorder.
T
O USE THE WIRELESS CONTROLLER
W HEN YOU MOUNT THE CAMCORDER ON A
TRIPOD
Start/Stop