Canon Digital Video Camcorder ZR900 - Manual (Page 36)

Video
34
4
Push the joystick ( ) toward /
to begin the playback.
5 Push the joystick ( ) toward
/ again to pause the playback.
6 Push the joystick ( ) toward to
stop the playback.
During the playback of a scene:
[ SPEAKER VOLUME]
Adjust ( ) the volume
• The sound from the built-in speaker
will be muted when you close the
LCD panel or while the STV-250N
Stereo Video Cable is connected to
the AV terminal.
• If you turn down the volume
completely, the icon will change to
.
NOTES
• You can display the date and time of the
recording ( 36).
• To protect the tape and video heads, the
camcorder will enter the stop mode (
)
if left in playback pause ( ) mode for
4 minutes 30 seconds. To resume the
playback push the joystick (
) toward
/ .
D URING PLAYBACK
T O ADJUST THE VOLUME
FUNC.
FUNC.
Special Playback Modes
1
To enter most special playback modes you need to operate the buttons on the
wireless controller
2
( 14). There is no sound during the special playback modes.
1
During some special playback modes you may notice some anomalies (blocky video
artifacts, banding, etc.) in the playback picture.
2
The wireless controller is included only with the .
Special playback mode Initial mode
Operation on the camcorder
or on the wireless controller
Fast playback Normal playback : Push the joystick ( ) toward or
( ) toward and hold it down.
: Press and hold or
Reverse playback Normal playback : Press
1 frame reverse/advance Playback pause : Press or
Frame-by-frame playback Playback pause : Press and hold or
Slow playback Normal or reverse
playback
: Press
Double speed playback Normal or reverse
playback
: Press
Return to normal playback Special playback mode : Push the joystick ( ) toward / .
: Press
REW FF
SLOW
PLAY