Canon Digital Video Camcorder ZR900 - Manual (Page 53)

51
recording when copying is
complete.
6
This camcorder: Stop playback.
NOTES
• We recommend powering the
camcorder using the compact power
adapter.
• When recording to a VCR using an
analog connection –connection type
( 49)–, the quality of the edited tape
will be lower than the original.
• When recording to a digital video
recorder using the DV terminal
–connection type
( 49)–:
- If the picture does not appear,
disconnect the DV cable and restore
the connection after a short while or
turn the camcorder off and then on
again.
- Proper operation cannot be
guaranteed for all digital devices
equipped with a DV terminal. If the
operation does not work, use the AV
terminal.
Digital Video Dubbing
You can input video from other digital
video devices and record the input
video on the tape in the camcorder.
Connecting
Connect the camcorder to the video
input source using the digital
connection –connection type
(
49)– shown in Connection
Diagrams.
Dubbing
1
Load a blank tape in the
camcorder and load the recorded
(source) tape or disc in the
connected device.
2
Set the camcorder in record pause
mode.
[ REC PAUSE]
[EXECUTE]
3
Connected device: Start the
playback.
In record pause mode and while
recording you can check the picture
on the camcorder’s screen.
1
2
( 21)
FUNC.
( 22)
2
FUNC.