Cisco VPN 3002 - Manual (Page 45)

C H A P T E R
2-1
VPN 3002 Hardware Client Reference
OL-1893-01
2
Configuration
Configuring the VPN 3002 means setting all the parameters that govern its use and functionality as a
VPN device.
Cisco supplies default parameters that cover typical installations and uses; after you supply minimal
parameters in Quick Configuration, the system is operational. But to tailor the system to your needs, and
to provide an appropriate level of system security, you can configure the system in detail.
Configuration
This section of the Manager lets you configure all VPN 3002 features and functions.
• Quick Configuration: the minimal parameters needed to make the VPN 3002 operational. For more
information, use
online Help, or see the VPN 3002 Hardware Client Getting Started manual,
available only online.
• Interfaces: parameters specific to the private and public interfaces.
• System: parameters for system-wide functions: server access, IPSec, IP routing, built-in
management servers, system events, and system identification.
• Policy Management: enabling or disabling Protocol Address Translation (PAT).
Figure 2-1 Configuration Screen
See the appropriate chapter in this manual for each section of the Manager. Online help is available for
all sections.