Cisco VPN 3002 - Manual (Page 94)

8-16
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 8 Management Protocols
Configuration | System | Management Protocols | XML
Configuration | System | Management Protocols | XML
This screen lets you configure the VPN 3002to support an XML-based interface. Enabling XML
management (the default condition) allows the VPN 3002 to be more easily managed by a centralized
management system. XML is enabled by default. To disable the XML option, clear the check box. To
reenable the XML option, click the check box.
On this screen, you can also configure the VPN 3002 to enable HTTPS or SSH (or both) on the public
interface and to lock the XML interface to a specific HTTPS or SSH IP address.
Figure 8-16 Configuration | System | Management Protocols | XML Screen
Enable XML
Check the Enable check box, the default, to enable the XML management capability. You must also
enable HTTPS or SSH on the VPN 3002 public interface. Disabling the XML management capability is
not recommended.
Enable HTTPS on Public
Check the Enable HTTPS on Public check box to allow XML management over HTTPS on the
VPN 3002 public interface.