Cisco VPN 3002 - Manual (Page 254)

14-8
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 14 Using the Command-Line Interface
Menu Reference
1.2.1 or 1.2.2 Configuration > Interface Configuration > Configure the Private/Public Interface
1) Enable/Disable
2) Set IP Address
3) Set Subnet Mask
4) Select Ethernet Speed
5) Select Duplex
6) Back
Private/Public Interface -> _
1.3 Configuration > System Management
1) Servers (DNS)
2) Tunneling Protocols (IPSec)
3) IP Routing (static routes, etc.)
4) Management Protocols (Telnet, HTTP, etc.)
5) Event Configuration
6) General Config (system name, time, etc.)
7) Back
System -> _
1.3.1 Configuration > System Management > Servers
1) DNS Servers
2) Back
Servers -> _
1.3.2 Configuration > System Management > Tunneling Protocols
1) IPSec
2) Back
Tunnel -> _
1.3.3 Configuration > System Management > IP Routing
1) Static Routes
2) Default Gateway
3) DHCP
4) DHCP Options
5) Back
Routing -> _
1.3.4 Configuration > System Management > Management Protocols
1) Configure HTTP/HTTPS
2) Configure Telnet
3) Configure SNMP
4) Configure SNMP Community Strings
5) Configure SSL
7) Configure XML
8) Back
Network -> _