Cisco VPN 3002 - Manual (Page 63)

6-3
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 6 Tunneling
Configuration | System | Tunneling Protocols | IPSec
– DES-56
– 3DES-168
• Extended Authentication (XAuth)
• Mode Configuration (also known as ISAKMP Configuration Method)
• Tunnel Encapsulation Mode
Figure 6-2 Configuration | System | Tunneling Protocols | IPSec Screen
Remote Server
Enter the IP address or hostname of the remote server. This is the IP address or hostname of the public
interface on the VPN Concentrator to which this VPN 3002 connects. Use dotted decimal notation; for
example, 192.168.34.56. To enter a hostname, a DNS server must be configured.
Backup Servers
To configure IPSec backup servers on the VPN 3002, enter up to 10 backup servers, using either IP
address or hostname. Enter each backup server on a separate line. To enter a hostname, a DNS server
must be configured. Further, if you use hostnames and the DNS server is unavailable, significant delays
can occur.