Cisco VPN 3002 - Manual (Page 86)

8-8
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 8 Management Protocols
Configuration | System | Management Protocols | SNMP Communities
Community Strings
The Community Strings list shows SNMP community strings that have been configured. If no strings
have been configured, the list shows --Empty--.
Add/Modify/Delete
To configure and add a new community string, click Add. The Manager opens the Configuration |
System | Management Protocols | SNMP Communities | Add screen.
To modify a configured community string, select the string from the list and click Modify. The Manager
opens the Configuration | System | Management Protocols | SNMP Communities | Modify screen.
To delete a configured community string, select the string from the list and click Delete. There is no
confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the list.
Reminder:
The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save
Needed icon at the top of the Manager
window.
To discard your settings, click Cancel. The Manager returns to the Configuration | System | Management
Protocols screen.
Figure 8-9 Configuration | System | Management Protocols Screen
Configuration | System | Management Protocols | SNMP
Communities | Add or Modify
These Manager screens let you:
• Add: Configure and add a new SNMP community string.
• Modify: Modify a configured SNMP community string.