Optional parts, Lens replacement, Pj link notice – Canon LV-7575 User Manual
Page 60: Appendix optional parts
The parts listed below are optionally supplied. When ordering those parts, specify the item name and its Type
No. to the sales dealer.
● HDB 15 pin-SCART 21 pin Cable
Type No. : LV-CA31
● Ultra Wide Angle Lens
Type No. : LV-IL01
● Wide Angle Zoom Lens
Type No. : LV-IL02
● Long Focus Zoom Lens
Type No. : LV-IL03
● Ultra Long Focus Zoom Lens
Type No. : LV-IL04
● Network Imager
Type No. : LV-NI02
● Replacement Lamp
Type No. : LV-LP28
● Ceiling Mounting Hanger
Type No. : LV-CL07
The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector
for wide variety of uses.
For installation and replacement of the lens, always contact the sales dealer. The projector lens must be
installed or replaced by well-trained sales or service engineers. Do not attempt to install and replace the lens by
yourself as it may cause injury.
After installing the lens, attach the lens cap to the lens when setting up the projector.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector.
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
PJLink is a registered trademark of JBMIA.
PJ LINK NOTICE
CANON Projector Input
Y, Pb/Cb, Pr/Cr
Y, Pb/Cb, Pr/Cr
To the sales and service engineers:
Referring to the attached lens replacement and installation manual, replace or install the lens properly.