Preparation, Name of each part of projector, 7preparation – Canon LV-7575 User Manual
Page 7: Caution
NAME OF EACH PART OF PROJECTOR
BOTTOM OF CABINET
BACK OF CABINET
FRONT OF CABINET
FEET LOCK LATCHES
This projector is equipped with cooling fans for protecting from
overheating. Pay attention to the following matters to ensure
proper ventilation and avoid a possible risk of fire and malfunction.
● Do not cover the vent slots.
● Keep this side clear of any objects. Obstructions may block
cooling the air.
AIR INTAKE VENTS
When attaching the Network Imager
(optional) to the projector, remove the these
parts. Refer to the user’s manual of the
optional Network Imager.
Do not turn on the projector
with the lens cap attached.
High temperature from light
beam may damage the lens
cap and result in fire hazard.
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector, the
following precautions should be taken.
● Do not put a flammable object near this
● Keep the rear grills at least 1 m (3.3’) away
from any object, especially from heat-
● Do not touch this area, especially screws
and metallic parts. This area will become hot
when the projector is in use.
This projector detects internal temperature
and automatically controls operating power
of the cooling fans.
Kensington Security Slot
This slot is for a Kensington
lock used to deter theft of
the projector. For more
*Kensington is a registered trademark of
ACCO Brands Corporation.