Combination cooking, Child lock, Timer – CDA MC41BL User Manual
Page 8: Start/reset button, Control
Auto Menu
To auto cook food in the microwave, select the type and the weight of the food and the
microwave will automatically set the power and the time required.
•
Press the Auto Menu button to select the auto cook function
•
Select the weight of the food by turning the Defrost/Time Setting
anti-clockwise
control
until it reaches the appropriate weight (dependant on the programme chosen).
•
Press the Start/Reset button
Auto-reheat(A1) Potato (A2) Pizza (A3) Meat (A4) Fish (A5) Chicken (A6)
0.10 0.20
0.10
0.10
0.10
0.20
0.15 0.30
0.20
0.20
0.20
0.40
0.20 0.40
0.25
0.30
0.30
0.60
0.25 0.50
0.30
0.40
0.40
0.80
0.30 0.60
0.35
0.50
0.50
1.00
0.35 0.70
0.40
0.60
0.60
1.20
0.40 0.90
0.45
0.80
0.70
1.40
0.45 1.10
0.50
1.00
0.80
1.60
0.50 1.30
0.55
1.30
0.90
1.80
0.60 1.50
0.60
1.50
1.00
2.00
Grill
To select specific cooking times and power levels:
•
Press the Grill/Conve button so the display shows G-1
•
Select the cooking duration by turning the Time Setting control until it reaches the
appropriate time
•
Press the Start/Reset button
When grilling, the cooking time has two stages. At the end of the first half of cooking, the
programme will pause and the microwave will beep twice to indicate the need to turn the food
over. Once this has been done, close the door and press the Start/Reset button to restart the
programme. If you do not want to turn over the food, the oven will restart after one minute’s
pause.
Convection Cooking
To cook as a convection oven, the microwave first requires preheating.
• Press the Grill/Conve button to select the required temperature for preheating. Each
press of the button cycles through
•
Press the Start/Reset button
Once the preheat is complete, the microwave will stop and beep twice to indicate the microwave
is ready for the food.
•
Press the Grill/Conve button to select the required temperature for cooking. The display
will cycle through 230°, 220°, 200°, 180° and 160°
•
Select the cooking duration by turning the Time Setting control until it reaches the
appropriate time