Reviewing the last scene recorded – Canon DC20 EN User Manual
Page 34
34
In order to save power when the camcorder is powered by a battery pack,
the camcorder will automatically shut off if left without any operations for
5 minutes (
84). Approximately 30 seconds before the camcorder shuts
off, “
AUTO POWER OFF” appears in the center of the screen. If the
camcorder shuts off, move the power switch to OFF and then back to
CAMERA or PLAY.
About the LCD and viewfinder screen: The screens are produced using
extremely high-precision manufacturing techniques, with more than
99.99% of the pixels operating to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as black or green dots. This has
no effect on the recorded image and does not constitute a malfunction.
Reviewing the Last Scene Recorded
In record pause mode:
Press and release the
(record review) button.
• The camcorder plays back the last scene and returns to record
pause mode.
• While reviewing the scene, use the omni selector (
) to select
the
icon and press (
) to return to the recording mode. You
can also delete the scene by selecting (
) the
icon (
87).
The last scene review is only available if you have not changed operating modes
or turned off the camcorder after making the recording.