Canon ImageCLASS MF8050Cn - Manual (Page 141)

9-11
Tr
oubleshooting
If <Incor rect size/setting> Appears
The message appears when the paper size specifi ed in <Drawer 1>, <Drawer 2>*, or <Multi-Purpose Tray> in the <Paper Settings>
menu is diff erent from the size of the paper loaded in the paper cassette or multi-purpose tray. If the message appears, perform the
following operations.
* Cassette 2 (optional) can be used only for MF8350Cdn.
Change the <Paper Settings> menu according to the size of the loaded paper.
After canceling a job, see "Setting a Paper Size and Type" (
→P.2-16) , and then change <Paper Settings>.
IMPORTANT
For a print job
Check that the paper size setting on the computer is also correct.
Loading paper of the size specifi ed in the <Paper Settings> menu
See "Loading Paper" (
→P.2-9) and reload the paper specifi ed in the <Paper Settings> menu.
Printing from the multi-purpose tray/manual feed slot
When <Register Default Set.> is set to <Off > for the multi-purpose tray, load paper in the multi-purpose tray/manual feed slot, and
then specify the size of the loaded paper correctly.