Canon ImageCLASS MF8050Cn - Manual (Page 48)

2-12
D
o
cument and P
aper Handling
(2) Place the stack of envelopes on a fl at surface. Flatten the
envelopes by releasing any remaining air and creasing the
edges.
(3) Loosen any stiff corners of the envelopes and fl atten curls as
shown in the fi gure.
(4) Align the edges of the envelopes on a fl at surface.
(5) Gently insert the paper into the multi-purpose tray with the
print side up.
6
Align the paper guides with the width of the
paper.
7
Specify the loaded paper size and type.
"Setting a Paper Size and Type" ( →P.2-16)
In the Manual Feed Slot (for MF8050Cn)
Before loading paper in the manual feed slot, see "Precautions
when Loading Paper" ( →P.2-13) .
Use the manual feed slot when you want to copy or print on a
paper that is diff erent from what is in the paper cassette.
1
Slide the paper guides so they align with the
width of the loaded paper as shown in the fi gure.
Adjust the paper guides to the size of the paper, then load the
paper deeply to back of the tray.
IMPORTANT
Be sure to insert the paper cassette.
If the paper cassette is not inserted, you cannot print from the manual
feed slot.
2
Support the paper with your hands as shown in
the fi gure, and insert the paper until it touches
the back of the tray.
When the paper touches the back of the tray, it is caught by the
slot.
Only one sheet of the paper can be loaded in the manual feed slot.
"Paper Loading Orientation" (
→P.2-14)
When loading envelopes
Close the envelope fl ap.
3
Specify the loaded paper size and type.
"Setting a Paper Size and Type" ( →P.2-16)