Canon ImageCLASS MF8050Cn - Manual (Page 78)

5-8
Regist
ering D
estinations in the A
ddr
ess Book
Storing/Editing from the Remote UI
1
Start the web browser.
2
Enter "http://<the IP address of the machine>/" in
the address fi eld, and then press the [ENTER] key
on your keyboard.
Input Example: "http://192.168.0.215/"
3
Log on to the Remote UI.
(1) Select [System Manager Mode].
(2) Enter [System Manager ID] and [System Manager PIN].
(3) Click
[OK].
(1)
(2)
(3)
4
Click [Address]
→ [Coded Dial].
(1)
(2)
When storing a new coded dial code
Proceed to Step 5.
When editing a registered coded dial code
(1) Click the number or name.
(2) Click
[Edit].
(3) Specify the required settings in the edit screen for destinations, and
then click [OK].
When deleting a registered coded dial code
(1) Select the check box for which you want to delete the number, and
then click [Delete].
5
Click [Not Registered] or the number which is not
registered.
6
Select [Fax] from [Type].
7
Specify the required settings, and then click [OK].
(1)
(2)