Sending a fax abroad (adding pauses), Using the f ax f unc tions – Canon ImageCLASS MF8050Cn User Manual

Page 92

Advertising
background image

6-8

U

sing the F

ax F

unc

tions

4

After responding to the recoded message of the

information service, press [

] (Tone).

You can switch to the tone signal.

Specify destination.

2010 01/01 12:52AM

012XXXXXXT

Start Receiving

Resolution: 200 x 1...

5

Use the numeric keys to enter the required

numbers for the information service.

Specify destination.

2010 01/01 12:52AM

012XXXXXXT3456

Start Receiving

Resolution: 200 x 1...

6

If you want to send faxes, press [

] (B & W).

NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Telephone call

The external telephone must be connected to this machine.

Check the dial tone before entering a fax number.

If you enter the number before checking the dial tone, the call may
not be connected or the wrong number may be dialed.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Sending a Fax Abroad (Adding Pauses)

When sending a fax abroad, you may need to insert a pause
within the number.
When communicating abroad, the signal distance is extreme
and the signal route complicated. Because of this, you may not
be able to connect to a recipient by dialing an international
telephone identifi cation number, country code, and the
recipient's fax number at the same time. In this case, add a
pause after the international telephone identifi cation number.
Because adding a pause provides a point where wait time can
be added when dialing, it is easier to connect to the recipient.

FAX

Numeric keys

Start

Pause

Keys to be used for this operation

1

Place documents on the platen glass or load them

in the feeder.

"Placing Documents" (

→P.2-4)

"Documents Requirements" (

→P.2-2)

2

Press [

].

3

Set scanning settings for documents as needed.

"Fax Settings" (

→P.6-3)

4

Use the numeric keys to enter the international

access code.

For details on international access codes, contact the telephone
company you are subscribed with.

Fax

012

5

Press [

] (Pause) to enter a pause as needed.

The letter <p> indicating a pause is displayed.
A pause in the number represents a 2-second pause. To change
the pause time, see "Pause Time" (

→P.6-23) .

When you are adding pauses consecutively, press [

] (Pause)

again.

Fax

012P

6

Enter the country code, the area code, and the

fax/telephone number using the numeric keys.

Fax

012p031XXXXXX


Advertising
This manual is related to the following products: