Crestron electronic Automation Enclosures CAEN Series - Manual

The CAEN Series automation enclosures are designed to house Crestron’s
CLX-Series lighting control modules and PAC2 or PAC2M control systems. CAEN
enclosures are available in an assortment of sizes, suitable for surface or flush wall
mount installation. Each model has been engineered to provide a clean and
manageable installation with abundant provisions for wire termination and
electrical knockouts.
CAEN automation enclosures are designed to use space efficiently supporting over
a hundred possible circuits in the largest model. Both centralized and distributed
configurations are possible. A single PAC2 control system installed in a central
enclosure can support numerous satellite extension enclosures distributed
throughout a residence or commercial facility. Interconnection of the complete
network of enclosures requires just one circulating Cresnet cable. Dozens of
keypads, touchpanels, wall box dimmers, shade controllers, and other peripherals
can also be terminated within an enclosure, with separate compartments provided
for high and low voltage wiring.
Crestron lighting and automation systems are completely convection cooled for
silent and reliable operation. A vented front cover is included with every enclosure.
All models are constructed of 16-gauge galvanized steel and are pre-drilled for
mounting of the PAC2, PAC2M, CLX modules, CLT terminal blocks, power supplies,
and CAEN-BLOCK terminal block. Additional non-CLX lighting modules and third-
party contactors may be installed using Crestron’s CAEN-UMP universal mounting
plates. Grounding blocks and low-voltage partitions are included.
CAEN enclosures are also well suited for all types of Class 2 and Class 3
applications including voice and data structured wiring, security, and RF signal
distribution (as permitted by applicable codes).
CAEN enclosures are UL and C-UL listed. If you require a complete UL Listed
panel, Crestron offers this service through its UL Listed panel shop, providing
complete in-factory system configuration and assembly.
> Enclosures for CLX-Series lighting control modules and
PAC2/PAC2M automation control systems
> Available in five convenient sizes
> Surface or flush wall mountable
> Enable over 100 dimmer controlled circuits per enclosure
> Supports centralized and distributed system configurations
> Residential and commercial applications
> Quiet, reliable, and efficient convection cooling
> Includes galvanized steel backbox with grounding blocks, low-
voltage partitions, and vented front cover
> Additional mounting and termination accessories available
> For 120 and 230 Volt systems
> Also useful for non-lighting applications such as voice and data
structured wiring, security, and RF signal distribution
> UL Listed panel shop fabrication service available
AVAILABLE MODELS
CAEN-7X2 7 modules high x 2 modules wide
CAEN-7X1 7 modules high x 1 modules wide
CAEN-4X2 4 modules high x 2 modules wide
CAEN-4X1 4 modules high x 1 modules wide
CAEN-2X1 2 modules high x 1 modules wide
SPECIFICATIONS
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
16 Gauge galvanized steel backbox with perforated grey steel cover, surface or flush wall
mount
Dimensions (including cover)
CAEN-7X2: Height: 62.75 in (159.39 cm)
Width: 27.25 in (69.22 cm)
Depth: 4.32 in (10.98 cm)
CAEN-7X1: Height: 62.75 in (159.39 cm)
Width: 16.10 in (40.90 cm)
Depth: 4.32 in (10.98 cm)
CAEN-4X2: Height: 39.65 in (100.72 cm)
Width: 27.25 in (69.22 cm)
Depth: 4.32 in (10.98 cm)
CAEN-4X1: Height: 39.65 in (100.72 cm)
Width: 16.10 in (40.90 cm)
Depth: 4.32 in (10.98 cm)
CAEN-2X1: Height: 24.25 in (61.60 cm)
Width: 16.10 in (40.90 cm)
Depth: 4.32 in (10.98 cm)
Weight
CAEN-7X2: 65.0 lb (29.48 kg)
CAEN-7X1: 42.0 lb (19.05 kg)
CAEN-4X2: 43.0 lb (19.50 kg)
CAEN-4X1: 28.0 lb (12.70 kg)
CAEN-2X1: 19.0 lb (8.62 kg)
www.crestron.com | 800.237.2041
Crestron CAEN Series
Automation Enclosures
CAEN-7X2 loaded without cover CAEN-7X2 with cover