Canon DR-4080U - Manual (Page 24)

22
Summary of the Counter menu modes and settings
Number, mode and
Content
default display
01 Select the counter Selects for display the cleared counter (Scan) after scanning one
time, or selects for display the user counter (User).
0 1 . D i s p . C o u n t e r
S c a n
Scan User
Selects the cleared counter for display after scanning one time, or dis-
plays user-set counter.
02 Setting the user counter Selects the default number (0-9999999) before scanning.
Press to increase the user counter by one. Press once to de-
crease the user counter by one.
Pressing and holding down or rapidly increases or decreases the
value in units of 10.
02 Setting the User Selects increment number for the extender in the default num-
ber.
0 2 . U s e r C o u n t e r
+ 1
+1 +2 +3 •••••• +7 +8 +9
Press once to increase user counter extender by one. Press once
to decrease the user counter extender by one.
02 Clear the User Counter Clears the counter set by the user.
Press together to clear the user counter.
“Completed” displayed when counter is cleared.
Setting up the scanner
displayed on LCD
0 2 . U s e r C o u n t e r
0
Counter Extender
0 2 . U s e r C o u n t e r
C l e a r = < >