Canon DR-2020U - Manual (Page 29)

25
[Output settings] tab
Configure settings for the output method. The items that appear in
this tab differ depending on the [Output method] selected.
[File settings] tab
This tab appears when [Send by E-mail] is selected in the [Output
method] list box. The items that appear in this tab are the same as
those in the [Output settings] tab.
[Compose e-mail] tab
This tab appears when [Send by E-mail] is selected in the [Output
method] list box. Configure e-mail settings for sending the
scanned images.
In addition to these settings, you must also configure the
environmental settings to send the e-mails to which the scanned
images are attached. For details on settings, refer to the User
Manual.
[Scanner setting] tab
Configure scan conditions.
[Button assignment] tab
Configure settings to assign the job to a job button on the scanner.
If [Assign scanner button 1 to Scan First] is selected in the main
screen, assignment to job button 1 is not available.
Confirming Output
In [Select Scan Job], scanned images are output according to the
registered job settings. If [Confirm Output] is selected in the main
screen, an output confirmation screen appears after documents
are scanned, allowing you to confirm and change output settings
for the scanned images.
Hint
You can also click the CaptureOnTouch icon in the taskbar, and
enable or disable [Confirm Output] from the menu that appears.