Canon DR-2020U - Manual (Page 31)

27
4
Click the [Start] button.
The document is scanned. While scanning is in progress, the
number of pages scanned is displayed in addition to the scanner
settings.
When all the pages of the document are scanned, the scanned
images are output according to the registered job settings, and the
completion screen appears.
Hint
• Click [Return to main screen] to return to the main screen of
[Select Scan Job].
• If [Save to folder] is selected for the output method and you
click [Open storage folder], the folder in which the scanned
image files are stored will open.
Starting [Select Scan Job] with the Job
Buttons
The following, jobs are pre-assigned to the job buttons on the
operation panel.
• Three preset jobs are assigned to the job buttons, and the respective
scanning procedures will be processed automatically when these
buttons are pressed.
• Registered jobs can be assigned to the user defined job buttons.
When you press a user defined job button and then press the
START button, the scan job assigned to the button begins.
• You can also select registered jobs using the scroll keys. When you
press the START button, the selected scanning job begins.
Hint
If [Select Scan Job] is executed using a job button, CaptureOnTouch
closes automatically 5 seconds after output processing is finished.
User Defined Job Buttons Scroll Keys
Job Buttons