Canon DR-2510M User Manual

Page 61

Advertising
background image

Back

Previous Page Next Page

Contents

61

3

Select [Canon DR-2510C] or [Canon DR-2010C]

→ click [OK].

NOTE

If [Canon DR-2510C] or [Canon DR-2010C] is not displayed in the list of scanners,
reinstall the ISIS/TWAIN driver. (See "Installing the Software," on p. 13)

4

Select the default page size from the drop-down list

→ click [OK].

NOTE

The [Configure Device Settings] dialog box is displayed only when you select
[Canon DR-2510C] or [Canon DR-2010C] for the first time and click [OK], or
when you click [Setup] for [Scanner Selection].

The settings here are applied when you click the [Default] button on the ISIS
driver properties dialog box.

For a TWAIN driver, the default value is set to "LTR" and cannot be changed.

5

From the [Scan] menu, select [Scanner Setting].

The ISIS/TWAIN driver properties dialog box is displayed.

Scanner selection under Mac OS X

As an example, the following explanation describes the procedure when using
Image Capture, a standard-installed application for Mac OS X.

1

Start Image Capture.
To start Image Capture, click the hard disk icon (e.g. [Macintosh HD]), the
[Applications] folder, and then the [Image Capture] icon.

2

Click [Browse Devices] in the [Devices] menu.

3

Select the scanner you want to use, and select the [Use TWAIN software]
check box.

4

Click [OK].

Advertising
This manual is related to the following products: