Ac adapter, Moving the scanner, Ac adapter moving the scanner – Canon DR-2510M User Manual
Page 7
Back
7
•
Avoid exposing the scanner to rapid changes in temperature. If the room in
which the scanner is installed is cold but rapidly heated, water droplets
(condensation) may form inside the scanner. This may result in a noticeable
degradation in scanning quality.
•
The following conditions are recommended for optimal scanning quality:
- Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
- Humidity: 20% to 80% RH
•
Avoid installing the scanner near equipment that generates a magnetic field
(e.g. speakers, televisions, or radios.)
•
Connect only to a power outlet of the rated voltage and power supply frequency
(120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region).
•
Do not connect other electrical equipment to the same power outlet to which
the scanner is connected. Also, when using an extension cord, make sure that
the extension cord is rated for the current requirements of the scanner.
•
Never disassemble or modify the AC adapter, as it is dangerous.
•
The power cord may become damaged if it is often stepped on or if heavy
objects are placed on it. Continued use of a damaged power cord and AC
adapter can lead to an accident, such as a fire or electrical shock.
•
Do not use the power cord while it is coiled.
•
Do not pull directly on the power cord. When disconnecting the power cord,
grasp the plug and remove it from the outlet.
•
Keep the area around the power cord clear of objects so that the power cord can
be disconnected easily in an emergency.
•
Do not use an AC adapter other than the one provided with the scanner. Do not
use the AC adapter provided with the scanner with other products.
•
If you have any questions regarding the power supply, contact your local
authorized Canon dealer or service representative for further information.
•
When moving the scanner, always hold it with both hands to avoid dropping it.
The scanner weighs approximately 5.3 lb (2.4 kg).
•
Make sure to disconnect the interface cable and AC adapter before moving the
scanner. If the scanner is transported with these items connected, the plugs and
connectors may be damaged.
AC Adapter
Moving the Scanner