Craftsman 50136 - Manual (Page 3)

SAFETY INSTRUCTIONS
3
To avoid crushing and related injuries:
• NEVER work on, under or around a load
supported only by a jack.
• ALWAYS use appropriately rated jack
stands.
WARNING !
• L e e r , c o m p r e n d e r , y s e g u i r l a s
instrucciónes antes de utilizar el aparato.
• El manual de instrucciónes y la
información de seguridad deben estar
comunicado en lengua del operador
antes del uso.
• No seguir estas indicaciónes puede
causar daños personales o materiales.
ADVERTENCIA !
• Study, understand, and follow all
instructions provided with and on this
device before use.
• Do not exceed rated capacity.
• Use only on hard, level surfaces.
• Lifting device only.
• Immediately after lifting, support the
vehicle with appropriately rated jack
stands.
• Do not move or dolly the vehicle while
on the jack.
• Failure to heed these markings may
result in personal injury and/or property
damage.
WARNING !
! SAFETY MESSAGE !
Be sure all tools and personnel are clear
before lowering load. No alterations shall
be made to this device. Only attachments
a n d / o r a d a p t e r s s u p p l i e d b y t h e
manufacturer shall be used. Lift only on
areas of the vehicle as specified by the
vehicle manufacturer.
NOTE: Jack stands are rated per pair
unless otherwise noted.
Use 1 matched pair per vehicle only.
FIG. 1 FIG. 2
TO ASSEMBLE THE TWO PIECE
HANDLE
Assemble two piece handle by aligning holes
in upper and lower handles. (see Fig. 1)
Secure handle with provided bolt.
TO ASSEMBLE THE HANDLE INTO
THE SOCKET
Insert the assembled handle into the socket.
Secure with supplied bolt. (see Fig. 2)
Handle Socket
Assembled Handle
Bolt
ASSEMBLY
Upper Handle
Lower Handle
Bolt