Rep members subdirectory, Rep members/slave1, Name – Cisco Cisco Access Registrar 3.5 User Manual
Page 46: Ipaddress, Port
4-8
Cisco Access Registrar 3.5 Concepts and Reference Guide
OL-2683-02
Chapter 4 Understanding Replication
Replication Configuration Settings
Rep Members Subdirectory
The Rep Members\ subdirectory contains the list of slaves to which the master will replicate
transactions.
Rep Members/Slave1
Each slave is added much like a client is added. Each slave must have a configuration in the Rep
Members directory to be considered part of the replication network by the master. The master will not
transmit any messages or replications to servers not in this list, and any communication received by a
server not in this list will be ignored.
Note
Although it is possible to configure multiple slaves with the same master, we have only considered a
single-master/single-slave configuration. This is the recommended configuration.
Name
This is the name of the slave. The name must be unique.
IPAddress
This is the IP Address of the slave.
Port
This is the port upon which the master will send replication messages to the slave.