Cisco 7301 - Manual (Page 5)

5
Install the SFP Gigabit Interface Converter Module
Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view
directly with optical instruments. Statement 1051
Warning Class 1 laser product. Statement 10008
Warning Class 1 LED product. Statement 1027
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the
backplane with your hand or any metal tool, or you could shock yourself. Statement 94
• Only three of the six Gigabit Ethernet ports may be used at the same time.
• The Gigabit Ethernet small form-factor pluggable (SFP) GBIC module supports online insertion and removal (OIR).
• The native fiber optical Gigabit Ethernet ports and the RJ-45 Gigabit Ethernet ports are reported as GigabitEthernet 0/0,
GigabitEthernet 0/1, and GigabitEthernet 0/2 in software. You must use the media-type command to select which media type
you want to use before you configure these ports. See page 24.
Figure 2 Identifying SFP GBIC Module Latches
Different manufacturers have different types of latching mechanisms for Gigabit Ethernet SFP GBIC modules. There is no
correlation of the type of latch to the model (such as SX or LH) or technology type (such as Gigabit Ethernet) of SFP GBIC
modules. See the label for the SFP technology type and model. The SFP GBIC modules use LC-type connectors.
1 Sliding latch 3 Hinged latch
2 Hinged and sliding latch
80755
1 2 3